Molded grating
Molded grating has a typical square or rectangular grid pattern and are manufactured using molds where bundles of fiberglass are placed in layered with 90 degree angle. This gives a load carrying capacity in both directions in the horizontal plane.
Pultruded Grating
Pultruded gratings is assembled by longitudinal I-profiles. The profiles is produced by pultrusion process and installed together with a transverse locking profile.
Stair treads
Molded & pultruded stair treads are available in plate size of 0.572 x 3.66 m and 0.31 x 4.0 m. Molded stair treads have a yellow reinforced stair noses on both long sides. Treads are cut into desired length and width.
High Load Grating
High Load grating has a typical square or rectangular grid pattern and are manufactured using molds where bundles of fiberglass are placed in layered with 90 degree angle. This gives a load carrying capacity in both directions in the horizontal plane.
Fasteners
We stock all the necessary fasteners for our gratings. The fasteners are stocked in 316L material quality.
Protection sleeve
Composite drill bit
Special drill bits that is well suited for composite \ GRP products.
